Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 15 Visitors
tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

OT, Move this oil topic to the bench if you View Thread - Fordmech on Jan 4, 2009, 8:22 PM

What I reckon - Adam on Jan 4, 2009, 10:15 PM

If you can wait - cmf60 on Jan 5, 2009, 3:38 AM

If you can wait - ZZ28 on Jan 5, 2009, 4:24 AM

Re: If you can wait - Adam on Jan 5, 2009, 4:26 AM

OK guys, just post your theories and ideas, let a dead - Fordmech on Jan 5, 2009, 6:02 AM

theories and ideas - tinman on Jan 5, 2009, 12:03 PM

Re: theories and ideas - cmf60 on Jan 5, 2009, 3:49 PM

a crude calculation. - Fordmech on Jan 5, 2009, 7:11 PM

Maybe Dan Jones can check the math on this. n/m - Fordmech on Jan 5, 2009, 7:34 PM

Crude calculation - cmf60 on Jan 6, 2009, 2:18 AM

I'm at a disadvantage, I don't have a crank handy to - Fordmech on Jan 6, 2009, 4:07 PM

No kinks - cmf60 on Jan 6, 2009, 5:33 PM

Deployment Over! View Thread - Kevin Black on Jan 6, 2009, 8:43 AM

Really? it's been 8 months? - Roo on Jan 6, 2009, 8:54 AM

Welcome Back - kevin on Jan 6, 2009, 1:59 PM

Re: Welcome Back - Kevin Black on Jan 6, 2009, 3:33 PM

Thank You.. - J. E. Thatcher on Jan 6, 2009, 4:07 PM

Welcome home Kevin.. - blizz on Jan 6, 2009, 4:52 PM

Re: Welcome home Kevin.. - Mike on Jan 6, 2009, 5:30 PM

D0AE Valvetrain Recommedations Please??? View Thread - Curt K. on Jan 6, 2009, 4:21 PM

offy port o sonic, why is it so bad? View Thread - matt on Jan 5, 2009, 9:02 AM

Offy Port-O-Sonic=POS - blizz on Jan 5, 2009, 10:11 AM

Port O Sonic - tinman on Jan 5, 2009, 10:13 AM

Re: Port O Sonic - blizz on Jan 5, 2009, 10:23 AM

Offy=Old Designs - DaveMcLain on Jan 5, 2009, 12:19 PM

Re: Offy=Old Designs - matt on Jan 5, 2009, 5:09 PM

I have a 2v POS - Roo on Jan 6, 2009, 9:54 AM

Dan Jones - kidv on Jan 6, 2009, 9:58 AM

Re: Dan Jones - Dan Jones on Jan 6, 2009, 2:36 PM

dyno - matt on Jan 6, 2009, 3:25 PM

400M View Thread - justin on Jan 6, 2009, 7:27 AM

400 - Falcon67 on Jan 6, 2009, 8:33 AM

400M parts - Mark McKeown on Jan 6, 2009, 2:34 PM

OT..another Drag question View Thread - Bruce on Jan 4, 2009, 7:15 PM

Re: OT..another Drag question - clevelandstyle on Jan 4, 2009, 7:34 PM

side to side - Dan on Jan 4, 2009, 8:10 PM

Re: side to side - lawrence coppola on Jan 5, 2009, 1:55 AM

Re: side to side - Jay on Jan 5, 2009, 3:16 PM

slicks - kidv on Jan 5, 2009, 3:28 PM

Slick rubber compound plays a part..... - DAVID on Jan 5, 2009, 4:58 PM

Slicks - Falcon67 on Jan 6, 2009, 8:39 AM

I use.. - Randy on Jan 6, 2009, 11:32 AM

Stroker Kit Questions Where to Buy View Thread - bill on Jan 2, 2009, 2:40 PM

Re: Stroker Kit Questions Where to Buy - Anonymous on Jan 2, 2009, 3:16 PM

Re: Stroker Kit Questions Where to Buy - Aus Ford Parts on Jan 4, 2009, 9:31 PM

Re: Stroker Kit Questions Where to Buy - matt on Jan 2, 2009, 10:31 PM

Re: Stroker Kit Questions Where to Buy - James on Jan 2, 2009, 11:15 PM

I recommend... - Randy on Jan 3, 2009, 8:00 PM

Re: I recommend... - Joel on Jan 4, 2009, 1:11 PM

Lead me not into temptation... n/m - Barry R on Jan 4, 2009, 9:52 AM

Re: Stroker Kit Questions Where to Buy - clevelandstyle on Jan 4, 2009, 10:43 AM

Thanks - Anonymous on Jan 6, 2009, 9:41 AM

flywheel and headers View Thread - CraigDj on Jan 6, 2009, 8:09 AM

oil restriction? View Thread - justin on Dec 27, 2008, 10:54 PM

here we go again - lawrence coppola on Dec 28, 2008, 12:13 AM

Re: here we go again - justin on Dec 28, 2008, 12:53 AM

starting something - lawrence coppola on Dec 28, 2008, 1:43 AM

Re: starting something - justin on Dec 28, 2008, 1:59 AM

Re: starting something - Kevin Black on Dec 28, 2008, 2:19 AM

Re: starting something - lawrence coppola on Dec 28, 2008, 2:41 AM

Re: starting something - justin on Dec 28, 2008, 7:49 PM

Re: starting something - lawrence coppola on Dec 29, 2008, 1:59 AM

Re: starting something - justin on Jan 6, 2009, 6:02 AM

Do a search on here..... - Bruce on Dec 28, 2008, 6:51 AM

Mr Weidendorf's lifter bore bushing kit? - Dennis Kwasnycia on Dec 28, 2008, 3:15 PM

Re: Mr Weidendorf's lifter bore bushing kit? - Dennis Kwasnycia on Dec 28, 2008, 3:24 PM

Oiling Problems - wydendorf on Dec 28, 2008, 7:32 PM

Re: Oiling Problems - Dennis Kwasnycia on Dec 28, 2008, 8:05 PM

Re: Oiling Problems - Dennis Kwasnycia on Dec 28, 2008, 8:25 PM

cheep fix - lawrence coppola on Dec 29, 2008, 2:12 AM

Re: Mr Weidendorf's lifter bore bushing kit? - lawrence coppola on Dec 29, 2008, 2:49 PM

Re: Mr Weidendorf's lifter bore bushing kit? - wydendorf on Jan 1, 2009, 8:38 AM

forum, searches, oil mods. - justin on Dec 28, 2008, 7:58 PM

Re: forum, searches, oil mods. - wydendorf on Dec 29, 2008, 9:17 AM

OT...Drag guys...what are you running for View Thread - Bruce on Jan 4, 2009, 7:11 PM

Re: OT...Drag guys...what are you running for - clevelandstyle on Jan 4, 2009, 7:23 PM

Drive shaft - Ryan on Jan 4, 2009, 7:38 PM

I'm just wondering about rotating mass - Bruce on Jan 4, 2009, 8:04 PM

RPM ??? - Dan on Jan 4, 2009, 8:07 PM

Re: RPM ??? - lawrence coppola on Jan 5, 2009, 2:29 AM

shaft - Dan on Jan 5, 2009, 5:09 AM

I guess I did not make myself clear... - Bruce on Jan 5, 2009, 5:58 AM

Call me - wydendorf on Jan 5, 2009, 11:53 AM

other metals - tinman on Jan 5, 2009, 12:12 PM

shaft - john on Jan 5, 2009, 12:32 PM

Well... - kidv on Jan 5, 2009, 2:51 PM

'moly vs aluminum vs C/F..... - DAVID on Jan 5, 2009, 5:23 PM

Fatigue life - Mike on Jan 6, 2009, 4:18 AM

Oil Topic - External Line View Thread - Dustin Rinne on Jan 1, 2009, 9:42 PM

Dustin - cmf60 on Jan 1, 2009, 11:34 PM

Dustin - ZZ28 on Jan 2, 2009, 4:28 AM

Re: Dustin - lawrence coppola on Jan 2, 2009, 4:29 AM

I'm not wasting my time... - kidv on Jan 2, 2009, 7:45 AM

Re: I'm not wasting my time... - lawrence coppola on Jan 2, 2009, 3:08 PM

con rods - kidv on Jan 2, 2009, 3:34 PM

You are right on kid V - Miller Mylan on Jan 3, 2009, 11:00 PM

what works - Dan on Jan 2, 2009, 3:53 PM

I'm not wasting my time... - ZZ28 on Jan 2, 2009, 4:35 PM

My motor... - kidv on Jan 2, 2009, 5:12 PM

Re: Oil Topic - External Line - Anonymous on Jan 2, 2009, 8:04 AM

External oil line war?.....where's my gun (LOL) - DAVID on Jan 2, 2009, 6:01 PM

External line war? - ZZ28 on Jan 2, 2009, 6:51 PM

Re: External line war? - Kevin Black on Jan 2, 2009, 10:41 PM

That'll be $250 an hour please...... - DAVID on Jan 3, 2009, 1:40 AM

If I buy 10 sessions at a time can I get a discount? WIKI OILING PAGE - blizz on Jan 3, 2009, 8:16 AM

Good think'n Blizz... - Bruce on Jan 3, 2009, 3:35 PM

Happy New Year ! - danford1 on Jan 3, 2009, 4:18 PM

Opinions - Miller Mylan on Jan 3, 2009, 11:14 PM

2+2=4 - Fordmech on Jan 4, 2009, 8:16 AM

Re: Oil Topic - External Line - Anonymous on Jan 4, 2009, 9:12 AM

"Dry line"...... - DAVID on Jan 4, 2009, 5:56 PM

accusump - clevelandstyle on Jan 4, 2009, 7:13 PM

Clevestyle... - Bruce on Jan 4, 2009, 7:19 PM

accusump - john on Jan 5, 2009, 3:47 AM

Re: accusump - clevelandstyle on Jan 5, 2009, 4:43 AM

accusump - john on Jan 5, 2009, 12:38 PM

3 quart - clevelandstyle on Jan 5, 2009, 1:18 PM

Anybody running a T-5? View Thread - Clint Sherlin on Jan 4, 2009, 4:32 PM

Re: Anybody running a T-5? - James on Jan 4, 2009, 5:32 PM

Re: Anybody running a T-5? - coupe3w on Jan 5, 2009, 3:57 AM

LA Motorrepairs View Thread - ZZ28 on Jan 4, 2009, 6:01 AM

Re: LA Motorrepairs - lawrence coppola on Jan 4, 2009, 1:17 PM

LA Motorrepairs - ZZ28 on Jan 4, 2009, 1:42 PM

Re: LA Motorrepairs - lawrence coppola on Jan 4, 2009, 2:06 PM

Mr. Wydendorf's lifter bushing kit View Thread - ZZ28 on Jan 4, 2009, 6:09 AM

I emailed you, hope you got it - wydendorf on Jan 4, 2009, 6:45 AM

Email - ZZ28 on Jan 4, 2009, 1:43 PM

13.5 GPM View Thread - joe on Dec 23, 2008, 6:24 PM

13.5 GPM - ZZ28 on Dec 23, 2008, 8:50 PM

with no lifter bushings ? - joe on Dec 24, 2008, 10:12 AM

I've been thinking - cmf60 on Dec 25, 2008, 6:23 PM

ZZ28 is using a spur gear pump - joe on Dec 25, 2008, 7:23 PM

Interesting - cmf60 on Dec 25, 2008, 8:15 PM

Interesting - ZZ28 on Dec 26, 2008, 6:22 AM

I can see how the various exits would be appealing in the middle of the block - joe on Dec 26, 2008, 10:14 AM

right you are!! - ZZ28 on Dec 26, 2008, 11:03 AM

I'm glad - cmf60 on Dec 26, 2008, 1:00 PM

I wish I could give you a definitive answer - joe on Dec 26, 2008, 3:04 PM

Thanks for the answer Joe - cmf60 on Dec 26, 2008, 5:14 PM

I understand your doubts - joe on Dec 26, 2008, 6:09 PM

Re: I wish I could give you a definitive answer - lawrence coppola on Dec 26, 2008, 8:10 PM

Quote - cmf60 on Dec 26, 2008, 9:04 PM

Thank you some one with common sense - lawrence coppola on Dec 26, 2008, 9:31 PM

Re: I can see how the various exits would be appealing in the middle of the block - Adam on Dec 26, 2008, 3:12 PM

spur gear pump - ZZ28 on Dec 26, 2008, 6:32 AM

I've been thinking - ZZ28 on Dec 26, 2008, 6:21 AM

Re: I've been thinking - lawrence coppola on Dec 26, 2008, 4:29 PM

Re: I've been thinking - ZZ28 on Dec 26, 2008, 4:52 PM

Re: 13.5 GPM - lawrence coppola on Dec 24, 2008, 8:31 PM

Re: 13.5 GPM - ZZ28 on Dec 25, 2008, 9:35 AM

hard to swallow - lawrence coppola on Dec 25, 2008, 3:57 PM

going below .002 is tricky - joe on Dec 25, 2008, 5:48 PM

hard to swallow - ZZ28 on Dec 25, 2008, 8:44 PM

It would appear that we have pontiac to thank for these types of oil systems - joe on Dec 26, 2008, 10:24 AM

Pontiac oil systems - ZZ28 on Dec 26, 2008, 11:09 AM

there's an important point to be made here - joe on Dec 26, 2008, 3:06 PM

Re: 13.5 GPM - Anonymous on Dec 26, 2008, 2:02 PM

Re: 13.5 GPM - coupe3w on Dec 24, 2008, 7:06 AM

not early on - joe on Dec 24, 2008, 10:14 AM

over looked - lawrence coppola on Dec 26, 2008, 4:23 PM

I didn't necesarily overlook it - joe on Dec 26, 2008, 6:39 PM

cool - lawrence coppola on Dec 26, 2008, 7:23 PM

Interesting ! - joe on Dec 26, 2008, 7:46 PM

Re: Interesting ! - lawrence coppola on Jan 2, 2009, 4:39 AM

Just reading now.... but what about... - machstang70 on Dec 26, 2008, 6:45 PM

HTC - lawrence coppola on Dec 26, 2008, 7:29 PM

personally I'm lavish with the rods - joe on Dec 26, 2008, 8:05 PM

Re: 13.5 GPM - Anonymous on Dec 26, 2008, 8:07 PM

lateral thinking - lawrence coppola on Dec 26, 2008, 8:17 PM

Re: lateral thinking - clevochild on Dec 27, 2008, 1:38 AM

Re: lateral thinking - ZZ28 on Dec 27, 2008, 5:08 AM

Re: lateral thinking - Tony on Dec 27, 2008, 9:29 AM

Re: lateral thinking - ZZ28 on Dec 27, 2008, 3:53 PM

Re: lateral thinking - Tony on Dec 27, 2008, 10:38 PM

Re: lateral thinking - ZZ28 on Dec 28, 2008, 6:01 AM

be carefull - lawrence coppola on Dec 29, 2008, 2:38 AM

br careful - ZZ28 on Dec 29, 2008, 4:29 AM

Re: 13.5 GPM - Anonymous on Dec 27, 2008, 11:29 AM

There are many - cmf60 on Dec 27, 2008, 3:06 PM

Re: There are many - lawrence coppola on Dec 27, 2008, 3:26 PM

Re: There are many - ZZ28 on Dec 27, 2008, 3:56 PM

Exactly ... - cmf60 on Dec 27, 2008, 4:11 PM

There are many - ZZ28 on Dec 27, 2008, 3:58 PM

oil timing - lawrence coppola on Dec 27, 2008, 4:54 PM

Re: oil timing - cmf60 on Dec 27, 2008, 7:59 PM

Re: oil timing - lawrence coppola on Dec 27, 2008, 8:22 PM

Re: oil timing - cmf60 on Dec 27, 2008, 8:31 PM

Re: oil timing - lawrence coppola on Dec 27, 2008, 8:38 PM

Re: 13.5 GPM - ZZ28 on Dec 28, 2008, 6:14 AM

Re: 13.5 GPM - lawrence coppola on Dec 28, 2008, 12:54 PM

Re: 13.5 GPM - ZZ28 on Dec 28, 2008, 3:08 PM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 3:19 AM

Re: 13.5 GPM - ZZ28 on Dec 29, 2008, 4:23 AM

Reasons Are Simple - DaveMcLain on Dec 29, 2008, 6:33 AM

Had a long talk... - cmf60 on Dec 30, 2008, 5:00 AM

Not Sure - DaveMcLain on Dec 30, 2008, 11:15 AM

Cleaning a block - cmf60 on Dec 30, 2008, 3:36 PM

I think the Restriction is Relative... - DaveMcLain on Dec 30, 2008, 7:26 PM

Re: I think the Restriction is Relative... - cmf60 on Dec 31, 2008, 12:21 AM

Asside from The leaks - DaveMcLain on Dec 31, 2008, 7:02 AM

Re: Asside from The leaks - ZZ28 on Dec 31, 2008, 3:35 PM

I too Think it's the Pickup - DaveMcLain on Jan 1, 2009, 3:43 PM

You've convinced me - joe on Jan 1, 2009, 5:46 PM

Air vs fluid - shaneus on Dec 31, 2008, 8:34 PM

Hhhhmmm - cmf60 on Jan 1, 2009, 2:21 PM

Hhhmmm - ZZ28 on Jan 1, 2009, 4:47 PM

Sorry - cmf60 on Jan 1, 2009, 5:29 PM

Sorry - ZZ28 on Jan 1, 2009, 6:15 PM

Hey... - cmf60 on Jan 1, 2009, 6:28 PM

Hey... - ZZ28 on Jan 1, 2009, 6:36 PM

I have - cmf60 on Jan 1, 2009, 6:56 PM

I have - ZZ28 on Jan 2, 2009, 3:25 PM

Re: I have - cmf60 on Jan 2, 2009, 4:05 PM

I have - ZZ28 on Jan 2, 2009, 4:19 PM

"kick the Ford engineers right in the balls" - Anonymous on Jan 2, 2009, 5:01 PM

Restricting the Windsor Valvetrain all in One Location - DaveMcLain on Jan 2, 2009, 7:32 PM

Restricting the Windsor Valvetrain all in on location - ZZ28 on Jan 3, 2009, 5:50 AM

Hhhhmmm... - ZZ28 on Jan 1, 2009, 6:51 PM

I think - Anonymous on Jan 1, 2009, 7:06 PM

static v dynamic - lawrence coppola on Jan 2, 2009, 5:00 AM

I agree with the inertia issue - shaneus on Jan 2, 2009, 11:09 AM

Re: Had a long talk... - Adam on Dec 30, 2008, 3:30 PM

Yes - cmf60 on Dec 30, 2008, 4:16 PM

Yes - ZZ28 on Dec 31, 2008, 4:22 AM

Its not - cmf60 on Dec 31, 2008, 7:53 PM

Re: Had a long talk... - ZZ28 on Jan 1, 2009, 5:05 PM

BE = Big End ........ n/m - cmf60 on Jan 1, 2009, 5:31 PM

BE = Big End......... - ZZ28 on Jan 1, 2009, 6:13 PM

Re: BE = Big End......... - 70TooMach on Jan 2, 2009, 11:36 AM

Re: BE = Big End....... - ZZ28 on Jan 2, 2009, 3:18 PM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 3:49 PM

Re: 13.5 GPM - ZZ28 on Dec 29, 2008, 5:29 PM

Re: 13.5 GPM - lawrence coppola on Dec 29, 2008, 7:22 PM

SK/XE 80 GPM HTC - joe on Dec 29, 2008, 7:56 PM

Re: SK/XE 80 GPM HTC - lawrence coppola on Dec 29, 2008, 8:20 PM

Re: SK/XE 80 GPM HTC - ZZ28 on Dec 30, 2008, 4:23 AM

Re: SK/XE 80 GPM HTC - lawrence coppola on Dec 30, 2008, 4:52 AM

Re: 13.5 GPM - Anonymous on Dec 30, 2008, 4:45 PM

Re: 13.5 GPM - ZZ28 on Dec 31, 2008, 4:19 AM

so easy - lawrence coppola on Dec 31, 2008, 4:30 PM

so easy - ZZ28 on Jan 1, 2009, 6:24 AM

so easy - ZZ28 on Jan 1, 2009, 9:02 AM

Re: so easy - lawrence coppola on Jan 1, 2009, 1:43 PM

Re: so easy - ZZ28 on Jan 1, 2009, 4:18 PM

Re: so easy - lawrence coppola on Jan 1, 2009, 1:49 PM

Re: so easy - ZZ28 on Jan 1, 2009, 4:23 PM

Re: so easy - ZZ28 on Jan 1, 2009, 4:51 PM

Re: so easy - lawrence coppola on Jan 2, 2009, 2:36 PM

Re: So easy - ZZ28 on Jan 2, 2009, 4:14 PM

Although mentioned almost in passing here, - Fordmech on Jan 1, 2009, 10:51 AM

Re: Although mentioned almost in passing here, - Anonymous on Jan 1, 2009, 1:12 PM

wow, i never thought of that - tinman on Jan 1, 2009, 1:42 PM

my take on oiling - wydendorf on Jan 1, 2009, 3:58 PM

Question.... - cmf60 on Jan 1, 2009, 5:41 PM

Re: Question.... - wydendorf on Jan 1, 2009, 6:18 PM

Thanks - cmf60 on Jan 1, 2009, 6:37 PM

Re: Thanks - wydendorf on Jan 2, 2009, 6:32 AM

Thanks - ZZ28 on Jan 2, 2009, 4:27 PM

Re: Thanks - wydendorf on Jan 3, 2009, 7:35 AM

Re: Thanks - ZZ28 on Jan 3, 2009, 9:29 AM

Re: Thanks - wydendorf on Jan 3, 2009, 11:43 AM

Mr. Wydendorf's lifter bushing kit - ZZ28 on Jan 3, 2009, 9:13 PM

Just so you know.. - Bruce on Jan 3, 2009, 3:31 PM

Just so you know - ZZ28 on Jan 3, 2009, 3:41 PM

Re: Question.... - ZZ28 on Jan 1, 2009, 6:40 PM

crower called it straight shot oiling - joe on Jan 1, 2009, 5:37 PM

Have discused this - cmf60 on Jan 1, 2009, 5:49 PM

ford developed straight shot oiling - joe on Jan 1, 2009, 5:56 PM

Joe - cmf60 on Jan 1, 2009, 6:14 PM

A cleveland crank has 8 seperate drillings each of which goes straight thru - joe on Jan 1, 2009, 7:19 PM

Actually - cmf60 on Jan 1, 2009, 11:20 PM

crower referred to more common cranks having an intersect - joe on Jan 2, 2009, 10:07 AM

WOW... - Randy on Jan 2, 2009, 12:06 PM

"centrifugal force works to the good on cleveland cranks " - cmf60 on Jan 2, 2009, 1:13 PM

centrifugal force works to the good on cleveland cranks - ZZ28 on Jan 2, 2009, 4:30 PM

New motor time, some questions View Thread - Chris Berndt on Dec 31, 2008, 7:16 AM

Some remarks - Falcon67 on Dec 31, 2008, 8:07 AM

I'll Tell you anyway Chris - Chris Berndt on Dec 31, 2008, 8:22 AM

Ditto, what Falcon says...also... - Bruce on Jan 3, 2009, 3:48 PM

If it were mine... - Jimmie Phillips on Dec 31, 2008, 8:13 AM

Re: If it were mine... - Chris Berndt on Dec 31, 2008, 8:25 AM

2:75's are going to limit you on cam choice - Roo on Dec 31, 2008, 9:40 AM

Re: 2:75's are going to limit you on cam choice - tinman on Dec 31, 2008, 1:23 PM

6cyl converter??? - Chris Berndt on Dec 31, 2008, 1:44 PM

Re: 6cyl converter??? - tinman on Dec 31, 2008, 3:27 PM

6 cylinder donut - Roo on Dec 31, 2008, 3:44 PM

Re: 6 cylinder donut - tinman on Dec 31, 2008, 4:17 PM

I remember for sure that it was a bolt in deal - Roo on Dec 31, 2008, 4:47 PM

Re: New motor time, some questions - Anonymous on Dec 31, 2008, 12:08 PM

converters - Miller Mylan on Dec 31, 2008, 10:50 PM

ever verify the rear gear? - tinman on Jan 1, 2009, 12:03 AM

Beg pardon, if - James on Jan 2, 2009, 11:56 PM

Rear end and valve seals - Chris Berndt on Jan 3, 2009, 6:53 PM

Re: New motor time, some questions - Dean Hehn on Jan 3, 2009, 6:44 PM

Retorquing CHI aluminum heads? View Thread - Ralf on Dec 31, 2008, 3:49 AM

Can't hurt - Jim Sams on Dec 31, 2008, 6:59 AM

Re: Retorquing CHI aluminum heads? - dion on Dec 31, 2008, 7:14 AM

Re: Retorquing CHI aluminum heads? - lawrence coppola on Dec 31, 2008, 3:45 PM

Felpro - Ralf on Jan 1, 2009, 5:54 AM

Alloy torquing - dion on Jan 1, 2009, 2:19 PM

Re-check/re-torque... - Randy on Jan 2, 2009, 12:08 PM

CHI Retorque - Anonymous on Jan 2, 2009, 2:44 PM

Re: Re-check/re-torque... - James on Jan 2, 2009, 11:23 PM

Couldn't hurt to....... - DAVID on Jan 3, 2009, 1:55 AM

Thanks a lot, for your answers, I will retorque the heads n/m - Ralf on Jan 3, 2009, 5:46 AM

OT- Assembling Heads? View Thread - B Jones on Jan 2, 2009, 6:59 PM

Re: OT- Assembling Heads? - tinman on Jan 2, 2009, 10:24 PM

Re: OT- Assembling Heads? - Kevin Black on Jan 2, 2009, 10:33 PM

Re: not OT - tinman on Jan 2, 2009, 11:05 PM

Re: OT- Assembling Heads? - James on Jan 2, 2009, 11:13 PM

Re: OT- Assembling Heads? - lawrence coppola on Jan 3, 2009, 3:52 AM

Perfect low budget intake sealant fix..... View Thread - BOB on Jan 3, 2009, 12:05 AM

oil flow path View Thread - coupe3w on Jan 1, 2009, 10:16 AM

Re: oil flow path - Anonymous on Jan 1, 2009, 10:55 AM

flow paths (edited) - tinman on Jan 1, 2009, 11:09 AM

close but - Dan on Jan 1, 2009, 11:35 AM

flow paths (edited) - ZZ28 on Jan 1, 2009, 4:54 PM

it's good ?????????????? - Dan on Jan 1, 2009, 7:30 PM

there are some small details missing - joe on Jan 1, 2009, 7:43 PM

it's good???????????????? - ZZ28 on Jan 1, 2009, 8:13 PM

mirror - Dan on Jan 2, 2009, 1:26 AM

Re: mirror - Anonymous on Jan 2, 2009, 3:58 AM

Re: mirror - ZZ28 on Jan 2, 2009, 4:38 PM

That diagram is good except for the OP sensor port. - Tom Custom on Jan 2, 2009, 7:51 AM

Re: oil flow path - Anonymous on Jan 2, 2009, 7:35 AM

point - Dan on Jan 2, 2009, 3:38 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net